Transit Connect L4-2.0L (2010)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position (CKP) Sensor
Removal
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Vehicle Jacking and Lifting.
2. Remove the 2 bolts and the accessory drive belt splash shield.
3. Disconnect the Crankshaft Position (CKP) sensor electrical connector.
4. Turn the crankshaft clockwise until the hole in the crankshaft pulley is in the 3 o'clock position.
