Transit Connect L4-2.0L (2010)
click in place. Pull back on the selector lever cable to make sure that it is locked into the selector lever cable bracket. Also make sure that the
selector lever cable end is correctly installed onto the ball stud. Pull back on the selector lever cable end to make sure that the selector lever cable
end is correctly installed.
Install the selector lever cable on the selector lever.
1. Move the selector lever to the PARK position.
2. Install the selector lever cable in the selector lever assembly.
3. Install the selector lever cable eyelet on the ball stud.
4. Install the floor console. For additional information, refer to Instrument Cluster / Carrier &/or Interior Moulding / Trim.
5. Adjust the selector lever cable. For additional information, refer to Selector Lever Cable Adjustment See: Adjustments.