Windstar V6-232 3.8L (1995)
2.
Insert the new rod through Hole #1 then guide the rod through Holes # 2 and # 3 (Figure 1).
3.
Pull the spring over Section "A" of the parking brake control (Figure 1).
4.
Verify proper operation of the parking brake control.
5.
Reinstall the parking brake boot. The handle and boot will click into position when properly installed.
PART NUMBER
PART NAME
F78Z-270O-AA
Parking Pawl Actuating Rod
OTHER APPLICABLE ARTICLES: NONE
SUPERSEDES: 97-15-16
WARRANTY STATUS: Eligible Under The Provisions Of Bumper To Bumper Warranty Coverage
OPERATION
DESCRIPTION
TIME
985A28A
Replace Parking Pawl
0.3 Hr.
Actuating Rod
DEALER CODING
CONDITION
BASIC PART NO.
CODE
2780
01
OASIS CODES: 302000