Windstar V6-232 3.8L (1995)
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
Attachment III - Technical Information
OVERVIEW
This document details the procedure for inspecting and either replacing the right front brake line with a revised part, or adjusting the routing of the
existing brake line.
INSPECTION
1.
Raise the vehicle.
2.
Inspect the right front brake line in the area above the catalytic converter for the following conditions:
^
Corrosion - Replace the brake line; continue with Brake Line Replacement.
For corrosion examples, see Figure 1.
^
Leaks - Replace the brake line; continue with Brake Line Replacement.
^
Contact with any components - Adjust the brake line routing or replace the line depending on the following conditions:
a)
If the brake line is in contact with any components and in good condition (no leaks or corrosion), continue with Step 3 of this Inspection.
b)
If the brake line is in contact with any components and in poor condition (leaks or corrosion), continue with Brake Line Replacement.
