Windstar V6-232 3.8L (1995)
Air Door Actuator / Motor: Service and Repair
1. Remove both rear passenger seats.
2. Remove the three push pins retaining the auxiliary heater-air conditioner trim cover.
3. Grasp the lower edge of the trim panel, lift outward and push up to remove panel.
4. Disconnect blower switch and illumination electrical connections.
5. Disconnect the vacuum hose from the function door vacuum control motor (18A318).
6. Remove the two screws retaining the vacuum control motor and remove vacuum control motor.
7. To install, reverse removal procedure.
