Windstar V6-232 3.8L (1995)
Fig. 3 Hub From Bearing Removal
9. Using hub puller, tool No. D80L-002-L and hub protector, tool No. D80L-625-1 or equivalents remove hub from bearing.
10. Remove and discard bearing retainer snap ring.
Fig. 4 Bearing From Knuckle Removal
11. Place hub in a suitable press, then using front bearing spacer, tool No. T86P-1004-A2 (stepped side up) and bearing remover, tool No.
T83P-1004-AH2 or equivalents, press bearing from knuckle.
INSTALLATION
1. Ensure journal area of knuckle is clean and free from damage.