Windstar V6-232 3.8L (1995)
EGR Valve: Service and Repair
EGR Valve
REMOVAL
^
Remove EGR transducer and EGR vacuum regulator bracket.
^
Disconnect EGR valve emission vacuum control hose and EGR pressure valve sensor hose from EGR valve.
^
Disconnect EGR valve to exhaust manifold tube from EGR valve.
^
Remove EGR valve retainer screw and washer, retainer stud and washer and the EGR valve from upper intake manifold.
^
Remove EGR valve gasket and clean residue from upper intake manifold sealing surface.
INSTALLATION
^
To install, reverse removal procedure. Tighten EGR valve retainer screw and washer and retainer stud and washer to 20-30 Nm (15-22 ft lb).
Tighten EGR valve to exhaust manifold tube nut to 34-47 Nm (25-35 ft lb).
