Windstar V6-232 3.8L (1995)
Air Filter Element: Service and Repair
Removal and Installation
REMOVAL
1. Loosen engine air cleaner tube clamp at air cleaner outlet tube to mass air flow sensor and remove air cleaner outlet tube from mass air flow
sensor.
2. Loosen air cleaner cover retaining screws until cover is free from air cleaner body. Do not remove screws.
3. Position air cleaner cover aside.
4. Remove air cleaner element.
INSTALLATION
CAUTION: Do not tamper with sensing elements located in the airflow bypass of the mass airflow sensor.
1. Clean all inside surfaces of engine air cleaner.
2. Install the air cleaner element.
3. Position air cleaner cover. Install bolts. Tighten bolts to 3-4 Nm (27-35 in lb).
4. Connect engine control sensor wiring to mass air flow sensor. Connect intake air temperature sensor wiring to the intake air temperature sensor.
5. Install air cleaner outlet tube. Tighten engine air cleaner tube clamp to 3-5 Nm (27-44 in lb).
