Windstar V6-232 3.8L (1995)
Powertrain Control Module: All Technical Service Bulletins
Powertrain Control Module - Calibration Revision
Article No.
95-3-21
02/13/95
^
ENGINE - 3.8L - POWERTRAIN CONTROL MODULE (PCM) - CALIBRATION REVISION FROM R10 TO R11, INCLUDES AX4S
TRANSAXLE
^
TRANSAXLE - AX4S - CALIBRATION REVISION FROM R10 TO R11, INCLUDES POWERTRAIN CONTROL MODULE (PCM) - 3.8L
ENGINE
LIGHT TRUCK:
1995 WINDSTAR
ISSUE:
Calibration revisions have been made from R10 to R11, as of August 5, 1994. This level change includes Powertrain Control Module (PCM) calibration
and revisions to some internal transaxle components. Therefore, the proper transaxle and Powertrain Control Module (PCM) combination is essential.
ACTION:
If replacement of the transaxle or PCM is required, the correct PCM and transaxle combination is necessary for proper transaxle operation. Refer to the
chart.
OTHER APPLICABLE ARTICLES: NONE
WARRANTY STATUS: INFORMATION ONLY
OASIS CODES: 499000, 504000
