Windstar V6-232 3.8L (1995)
Ignition Wire Routing
2. Install each spark plug wire on the proper ignition coil. Refer to the Ignition Wire Routing illustration which shows spark plug wire routing. The
terminal cylinder numbers are identified on the ignition coil pack. Make sure that the coil wire boots are fully seated and that both coil boot
retainer locking tabs have engaged.
3. Remove the wire retaining brackets from the old spark plug wire sets and install brackets in same relative position on the new set. Install spark
plug wire sets and retaining brackets on the engine.
4. Connect spark plug wires to proper spark plugs.