Windstar V6-232 3.8L (1995)
6.
Remove J-strips from rear inboard seat back trim (Figure 5, Item 10).
7.
Remove hog ring retaining outboard seat back trim to frame (Figure 2, Item 14).
8.
At this point, change one (1) retractor at a time. Use the other as reference.
9.
Remove C-clip for inboard end of top inboard mounting pin (Figure 5, Item 11).
10.
Remove top inboard module mounting pin (Figure 5, Item 12).
11.
Push top of module inboard to disengage outboard side and fold forward (Figure 5, Item 13).
12.
Remove six (6) bolts as follows:
a.
One (1) bolt (pointed bottom) retains retractor bracket to cushion frame (Figure 2, Item 5). Torque = 18-27 N.m (13-20 lb-ft).
