Windstar V6-232 3.8L (1995)
Inertia Fuel Shutoff Switch: Service and Repair
Reset
WARNING: If you see or smell gasoline at any time other than during fueling, do not reset the inertia fuel shutoff switch.
1. Turn ignition switch to OFF.
2. Check for leaking fuel in the engine compartment, fuel lines and fuel tanks. Repair if necessary.
3. If no fuel leak is apparent, reset the inertia fuel shutoff switch by pushing the reset button on the top of the inertia fuel shutoff switch.
4. Turn ignition switch to START for a few seconds, then to OFF.
5. Again, check for leaking fuel. Repair if necessary.