Windstar V6-232 3.8L (1995)
^
Total Toe\Clear Vision - refer to Figures 3 and 4. Positive value specification for toe is referred to as toe-in, while negative value specification for
toe is toe-out.
1.
Before beginning, make sure the alignment machine is properly calibrated. Follow the manufacturer's maintenance schedule and operating
instructions to obtain the best results. Your alignment rack must be leveled with 1.59 mm (1/16") side-to-side and front-to-rear. The
instrumentation used must have a means of compensating for wheel runout and must be capable of reading individual (LH and RH) toe
measurements.
2.
Place the vehicle on the alignment rack and check the front subframe for alignment. This may be gauged with Rotunda Subframe Removal Kit.
Make sure the four (4) subframe mounting bolts are torqued to 68-91 N-m (50-67 lb-ft). DO NOT shift the subframe in an attempt to service a
drift or pull condition.
