Windstar V6-232 3.8L (1995)
Pinion Bearing Removal
10. Insert lower pinion shaft seal remover tool No. T86P-3504-F, or equivalent, until it bottoms along with lower pinion seal remover guide, tool No.
T86P-3504-J, or equivalent. Activate expander with pair of wrenches by holding large nut and turning small nut until expander fully tightens. Pull
tool and seal with impact slide hammer tool No. T50T-100-A, or equivalent.
11. Remove pinion bearing from steering gear housing with impact slide hammer and puller, tool Nos. T50T-100-A and T58L-101B, or equivalents.
ASSEMBLE
