Windstar V6-232 3.8L (1995)
Valve Body Guide Pins And Bolts
14. Position valve body separator plate with bonded gasket on pump housing. Insert Valve Body Guide Pin Set T86P-70 1 00-A and Valve Body
Guide Pin T86P-7011 00-B. Then, install two Torx bolts. Tighten bolts to 9-12 Nm (80-106 inch lbs.). Remove guide pins.
15. Position main control valve body on pump.
Valve Body Guide Pins
16. Insert Pump Body Guide Pins T86P-70370-A and Valve Body Guide Pin T86P-70100-C, as shown. Install two valve body-to-pump retaining bolts
and tighten to 9-12 Nm (80-106 inch lbs.). Remove guide pins.
