Windstar V6-232 3.8L (1995)
Spider And Shaft Assembly
3. Install spider assembly on interconnecting shaft with chamfered side toward stop ring. Spider assembly is fully seated on interconnecting shaft
when "click" is heard, indicating snap ring engagement.
4. On lefthand inboard front wheel driveshaft joint, install tri-lobe insert on housing.
Tri Lobe Insert And Grease Application
5. On both driveshaft joints, fill housing with grease supplied in service kit, then spread remaining grease evenly inside front wheel driveshaft joint
boot, noting the following:
a. Total combined fill is 8.8 oz for lefthand side and 7.1 oz for righthand side.
b. If grease packet is not available, use Ford High-Temperature Constant Velocity Joint Grease part No. E43Z-19590-A, or equivalent.
