Windstar V6-3.8L VIN 4 (1997)
Transmission Position Switch/Sensor: Adjustments
PROCEDURE
1. Remove nut securing manual control lever to Transmission Range (TR) sensor.
2. Turn manual control lever to NEUTRAL position.
3. Loosen two TR sensor retaining bolts
4. Align TR sensor slots using TR Sensor Alignment Tool T92P-70010-AH.
5. Tighten retaining bolts to 9-12 Nm (80-106 lb in).
6. Install nut retaining manual control lever to TR sensor and tighten to 16-24 Nm (12-16 lb ft).
