Windstar V6-3.8L VIN 4 (1997)
equivalent. A 1/4-20 x 1/2-Inch screw and washer assembly and a 1/4-20 nut and washer assembly may be used for retention if 1/4-Inch rivets are
not available. (Equivalent metric retainers may also be used).
3. Insert window regulator equalizer arm bracket through door access hole, sliding window regulator equalizer arm bracket onto front door window
regulator arm slides and two retaining studs through door inner panel.
4. Install two nut and washer assemblies to window regulator equalizer arm bracket retaining studs and tighten to 7-10 Nm (62-88 Lb-In).
5. Install front door window glass.
6. Check operation of front door window regulator.
7. Install front door inside panel sound insulator and front door trim panel.
