freightliner Workshop Repair Guides

Freightliner Workshop Service and Repair Manuals

Engine, Cooling and Exhaust > < Malfunction Indicator Lamp|Description|Page 438
Page 1
background image

Oil Change Reminder Lamp: Service and Repair

MAINTENANCE - WITH ASSYST MAINTENANCE COMPUTER

To reset the ASSYST MAINTENANCE COMPUTER, perform the following steps:

-

Turn key to the ON/RUN position.

-

Within one second press the knob/button twice.

-

The present status for days or distance is displayed. Within 10 seconds turn the key to OFF/LOCK.

-

Press and hold the knob/button, while turning the key to ON/RUN again. The present status for days or distance is displayed once more. Continue
to hold the knob/button.
After approximately 10 seconds, a signal sounds and the display shows 16 000 km (10,000 miles) for approximately 10 seconds.

-

Release the knob/button.When disconnecting vehicle battery for one or more days at a time, such days will not be counted. Any such days not
counted by ASSYST can be added by your authorized dealer.

If the ASSYST counter was inadvertently reset, have an authorized dealer correct it.

The message is displayed for approximately 10 seconds when turning the key to the ON/RUN position, or while driving when reaching the service
warning threshold. It can be canceled manually by pressing the knob/button.

Once the suggested term has passed, the message plus either the symbol for Service A or the symbol for Service B preceded by a - (minus symbol)
blinks for approximately 30 seconds and a signal sounds every time when turning the key to the ON/RUN position.

The ASSYST display can also be called up for approximately 10 seconds with the display illuminated by pressing the knob/button twice within one
second.

Following a completed A or B service your authorized dealer sets the counter to 16 000 km (10,000 miles).

The interval between services is determined by the type of vehicle operation. Driving at extreme speeds, and cold starts combined with short distance
driving in which the engine does not reach normal operating temperature, reduce the interval between services.

However you choose to set your reference numbers, the scheduled services as posted in the Service Booklet must be followed to properly care for your
vehicle.

Engine, Cooling and Exhaust > < Malfunction Indicator Lamp|Description|Page 438