Sprinter 3500 L5-2.7L DSL Turbo (2004)
Intake Manifold: Service and Repair
INTAKE MANIFOLD
REMOVAL
WARNING: NO FIRE, SPARKS OR SMOKING. STORE FUELS ONLY INTO SUITABLE AND APPROPRIATELY MARKED
CONTAINERS, AND WEAR PROTECTIVE CLOTHING. (Refer to FUEL SYSTEM WARNING).
WARNING: DO NOT OPEN THE COOLING SYSTEM UNLESS THE COOLANT TEMPERATURE IS BELOW 90°C (194°F). OPEN
RADIATOR CAP SLOWLY TO RELEASE PRESSURE. STORE COOLANT ONLY INTO SUITABLE AND APPROPRIATELY
MARKED CONTAINERS, WEAR PROTECTIVE CLOTHING AND EYE PROTECTION.
1. Disconnect the negative battery cable.
2. Partially drain coolant from the radiator.
3. Remove the engine cover.
4. Remove the high pressure fuel lines (Fig. 66).
5. Remove the fuel rail.
6. Remove the fuel rail support block between cylinders #1 and #2 (Fig. 66).