Sprinter 3500 V6-3.0L DSL Turbo (2007)
3. Align the instrument cluster (2) with the instrument panel opening.
4. Press firmly and evenly on the face of the instrument cluster over the two integral latches (3) until both latches are fully engaged.
5. Reconnect the battery negative cable.
CAUTION: If an ineffective and unresponsive Instrument Cluster (IC) has been replaced with a new unit, the new IC must be initialized
and configured for certain optional equipment on the vehicle using a cluster programming procedure. Failure to correctly perform this
programming procedure (also referred to as parameterization) prior to the IC being electronically locked down will result in the IC being
incorrectly and irreversibly configured for improper vehicle equipment options, which will require the IC be replaced again with another
new and unused unit to resolve.
