Metro L3-61 1.0L (1990)
Brake Shoe: Service and Repair
Inspection
1.
If any parts are of doubtful strength or quality due to heat discoloration, or are worn, replace them.
2.
Inspect wheel cylinder dust boots for signs of excessive wear or damage. If any leakage is apparent replace or rebuild wheel cylinder.
3.
Clean dirt and/or rust from brake drum, backing plate and all other components. Do not use compressed air or dry brush to clean brake parts.
Many brake parts contain asbestos fibers which, if inhaled, can cause serious injury. Clean brake parts with a water soaked rag or a
suitable vacuum cleaner to minimize airborne dust.
