Metro L3-61 1.0L (1990)
Fuel Pressure Release: Service and Repair
WARNING: To reduce the risk of fire and personal injury, it is necessary to relieve fuel system pressure before servicing fuel system
components.
A small amount of fuel may be released when servicing fuel lines or connections. In order to reduce the chance of personal injury, cover fuel
line fittings with a shop towel before disconnecting to catch any fuel that may leak out. Place the towel in an approved container when
disconnect is complete.
-
Remove fuel filler cap.
-
Disconnect control relay (fuel pressure relay).
-
Crank engine and allow it to stall.
-
Crank engine for an additional 30 seconds.
-
Remove negative battery cable.
-
Place a shop towel under the fuel pressure line.
-
Disconnect fuel pressure line.