Metro L3-61 1.0L (1990)
Power Steering Fluid: All Technical Service Bulletins
Power Steering - Reduced Assist At Low Temperatures
Number: 91-208-3B
Section: 3B
FEBRUARY 1991 Date:
Corporate Bulletin No.: 033206R
Subject:
REDUCED POWER STEERING ASSIST AT LOW AMBIENT TEMPERATURES
Model and Year:
ALL 1980-91 PASSENGER CARS
Applications
Appropriate for all passenger vehicles, but particularly beneficial in 1980 and later FWD Models equipped with Power Rack and Pinion Steering.
CONDITION
Comments of reduced power steering assist at low ambient temperatures (approximately 10 degrees Fahrenheit and lower) may be noted by some vehicle
operators when turning the steering wheel in BOTH the right and left direction during warm-up after cold start. All vehicles with power steering exhibit
this condition to varying degrees, but condition may be more noticeable with power rack and pinion steering systems that typically have longer hoses and
cooler lines.
Note:
This condition, which is related to power steering fluid viscosity, should not, however, be confused with conditions having similiar symptoms
such as that described in divisional bulletins indicated below, related to internal steering gear fluid by-pass.
Chevrolet # 88-417-3B
CAUSE:
In cold weather, power steering fluid thickens in the same manner as any other petroleumbased oil or fluid. Upon cold starting, the fluid resists
movement through the system and the driver senses reduced power assist (sometimes referred to as "stiff steer"). As the vehicle operates and fluid
circulates through the power steering system, the fluid warms and thins to its normal operating viscosity.
CORRECTION:
Saginaw Division has developed a new Low Temperature Climate Service Fluid for use in cold climates. Compared with conventional power steering
fluid, this new fluid flows better at low temperatures and resists the thickening which contributes to reduced power assist upon start up.
RACK AND PINION STEERING SYSTEMS
Reduced power assist upon cold weather starting may be more noticeable in Power Rack and Pinion steering systems that may contain six or more feet of
pressure and return hose along with long cooler lines. Such long systems contain greater volumes of fluid and vehicles so equipped tend to have longer
periods of reduced power assist. The new fluid performs particularly well with current designed Rack and Pinion steering systems and special
remanufactured Rack and Pinion Steering Assemblies.
PARTS INFORMATION:
Low Temperature Climate Service Fluid is available from GMSPO. Order as:
Container Size
Part Number
16
ounce
12345866
32
ounce
12345867
Parts are currently available from GMSPO.
SERVICE PROCEDURE:
The power steering fluid replacement procedure is a two-stage process: first, flushing the old fluid from the system with new fluid; and second, bleeding
the system to remove any trapped air. The following two sequences outline the steps in each procedure.
FLUSHING THE POWER STEERING SYSTEM
