Metro L3-61 1.0L (1990)
4.
Remove screws holding underhood fuse/relay block.
5.
Remove connector holding fuel pump relay and disconnect.
6.
Start engine and run until it stalls, crank engine for 3 seconds to insure there is no fuel left in lines.
7.
Disconnect negative battery cable.
8.
Remove air cleaner assembly.
9.
Disconnect fuel feed hose from throttle body.
10.
Install fuel pressure gauge (J 34730-1 or equivalent), and T-Fitting (J 34730-75 or equivalent) between fuel feed line and throttle body. Clamp
securely to ensure that no leaks occur.
