Metro L3-61 1.0L (1990)
Idle Speed Adjusting Screw
11.
If necessary, adjust idle speed by turning idle speed adjusting screw "IN" to increase or "OUT" to decrease idle speed.
12.
Remove spare fuse from diagnosis switch terminal, disconnect tachometer and install idle speed screw cover.
A/C VSV ADJUSTMENT [A/C idle up solenoid]
VSV Component Location
1.
Start engine and allow it to reach normal operating temperature (with A/C "ON").
2.
Connect a tachometer.
3.
Install a spare fuse in diagnosis switch terminal.