geo Workshop Repair Guides

Geo Workshop Service and Repair Manuals

Recall - Seat Belt Buckle Release Button Replacement|Page 4020 > < Recall - Seat Belt Buckle Release Button Replacement|Page 4018
Page 3
background image

COLOR MATCH, BOTH BUCKLE ASSEMBLIES (DRIVER & PASSENGER) MUST BE ORDERED WHEN EITHER BUCKLE ASSEMBLY
REQUIRES REPLACEMENT.

Owner Notification/Dealer Campaign Responsibility

OWNER NOTIFICATION

Owners will be notified of this campaign on their vehicles by Chevrolet Motor Division (see copy of owner letter included with this bulletin). Mailing of
owner letters will be scheduled on a phased basis (commencing with the oldest vehicles first) as parts become available.

DEALER CAMPAIGN RESPONSIBILITY

All unsold new vehicles in dealers possession and subject to this campaign must be held and inspected/repaired per the service procedure of this
campaign bulletin before owners take possession of these vehicles.

Dealers are to service all vehicles subject to this campaign at no charge to owners, regardless of mileage, age of vehicle, or ownership, from this time
forward.

Owners of vehicles recently sold from your new vehicle inventory with no owner information indicated on the dealer listing, are to be contacted by the
dealer, and arrangements made to make the required correction according to the instructions contained in this bulletin. This could be done by mailing to
such owners a copy of the owners letter accompanying this bulletin. Campaign follow up cards should not be used for this purpose, since the owner may
not as yet have received the notification letter.

In summary, whenever a vehicle subject to this campaign enters your vehicle inventory, or is in your dealership for service in the future, please take the
steps necessary to be sure the campaign correction has been made before selling or releasing the vehicle.

Special Instructional Video

Each dealer will be shipped an instructional video during the week of May 6, 1996. Mechanics should be certain to view this video tape before
attempting to perform the following service procedure.

Service/Inspection  Procedure (Both Front Seats)

IMPORTANT

THIS PROCEDURE MUST BE PERFORMED ON BOTH FRONT SEAT BELT BUCKLE ASSEMBLIES TO COMPLETE THE CAMPAIGN.

IMPORTANT

IF CUSTOMER COMPLAINS OF LATCHING PROBLEMS WITH EITHER FRONT SEAT BELT BUCKLE, BOTH BUCKLES WILL
REQUIRE REPLACEMENT TO ENSURE EXACT COLOR MATCH.

A LOT NUMBER INSPECTION WILL BE REQUIRED ON ALL 1991 MODEL VEHICLES.

1.

Slide front seat to the most rearward position and place clean shop cloth on seat and console. Ensure shop cloth allows access to seat belt buckle
assemblies.

2.

FOR 1991 VEHICLES ONLY: Inspect BOTH front seat belt buckle assemblies for the lot number markings (See Figure 1) to determine if
involved in recall. Using a pen light will help with this inspection.

Recall - Seat Belt Buckle Release Button Replacement|Page 4020 > < Recall - Seat Belt Buckle Release Button Replacement|Page 4018