Metro L3-61 1.0L (1990)
Seat Belt Buckle: All Technical Service Bulletins
Recall - Seat Belt Buckle Button Replacement
91-C-52A
CAMPAIGN: SEAT BELT
Issued: 06/01/96
PRODUCT SAFETY CAMPAIGN
-SUPPLEMENT-
SUBJECT:
91-C-52(a) - SEAT BELT BUCKLE ASSEMBLY
MODELS:
1989-91 GEO METRO & TRACKER AND 1990-91 GEO STORM
This bulletin supplements Product Safety Campaign 91-C-52 issued May, 1996, Administrative Message 01-169 created on 5/31/96 and Administrative
Message 01-171 created on 6/5/96. Specifically:
*
The Parts Information section has been revised to reflect revised part number usage for 1990-91 Geo Metro Seat Belt Buckle Assemblies
*
The Service Procedure section has been revised to reflect the complete monthly listing of date codes required for the inspection procedure and
reference of switch transfer required for 1990-91 Metro passenger buckle assemblies
*
The Claims section has been revised to reflect the correct labor hours required to replace both front seat belt buttons on the 1990-91 Metro.
The revised information is printed in bold type. This supplement should be filed with your campaign materials. PLEASE NOTE THESE CHANGES OF
YOUR ORIGINAL BULLETIN IN THE APPROPRIATE SECTIONS.
PARTS INFORMATION
Parts required to complete this campaign are to be obtained from General Motors Service Parts Operations (GMSPO). Normal orders should be placed
on a DRO = Daily Replenishment Order. An emergency requirement should be ordered on a CSO = Customer Special Order.
REPLACEMENT BUCKLE ASSEMBLIES
DUE TO THE SMALL PERCENTAGE OF VEHICLES THAT WILL REQUIRE THIS REPAIR (LESS THAN 10%) AND VERY LIMITED PARTS
AVAILABILITY, DEALERS ARE NOT TO ORDER REPLACEMENT BUCKLE ASSEMBLIES FOR USE AS SHELF STOCK. ONLY ORDER
REPLACEMENT BUCKLE ASSEMBLIES IF THEY ARE REQUIRED TO REPAIR A VEHICLE WITH AN INOPERATIVE BUCKLE
ASSEMBLY. WHEN IT IS CONFIRMED THAT BUCKLES ARE NEEDED THEY SHOULD BE ORDERED AS CSO.
