Metro L3-61 1.0L (1990)
23.
Check the operation of the buckle. Insert the seat belt latch plate into the buckle. Be sure there is a positive locking sound and check to see that it
latches properly by tugging on the seat belt latch plate while firmly holding the buckle. Repeat this step three (3) times. If it DOES NOT latch,
both buckle assemblies should be replaced.
24.
Connect the drivers side seat belt buckle switch connector and check for proper operation.
25.
Return seat to its original starting position.
26.
Remove shop cloth from seats and console.
27.
Install Campaign Identification Label.
Campaign Identification Label/Claim Information
CAMPAIGN IDENTIFICATION LABEL
Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label".
Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This
information may be inserted with a typewriter or a ball point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
periodic servicing by the owner. When using the new campaign identification label, be sure to install the clear protective covering. Additional
"Campaign Identification Labels", can be obtained from VISPAC Incorporated by calling 1-800-269-5100 (Monday through Friday 8:00 a.m. to 4:30
p.m. EST). Ask for Item Number S-1015 when ordering. Apply "Campaign Identification Label" only on a clean, dry surface.
CLAIM INFORMATION
Submit a Product Campaign Claim with the information indicated.
Owner Letter
May, 1996
Dear Geo Owner:
