Metro L3-61 1.0L (1990)
Throttle Position Sensor: Service and Repair
REMOVAL:
1.
Disconnect throttle position sensor connector.
2.
Remove throttle position sensor attaching screws and retainers.
3.
Remove throttle position sensor from throttle body.
INSTALLATION:
1.
With throttle valve in the normal closed idle position, install throttle position sensor on throttle body assembly.
2.
Install retainers and two TPS screws. Tighten screws to 2 N-m (18 lb. in.).
3.
Connect TPS electrical connector.