Metro L3-61 1.0L (1990)
Wiper Gear Box: Service and Repair
Fig. 10 Front Windshield Wiper/Washer Motor & Linkage Assembly
FRONT
1.
Disconnect battery ground cable.
2.
Remove both wiper arm and blade assemblies.
3.
Remove five push pins and left hand cowl panel.
4.
Remove three push pins and left hand cowl panel.
5.
Remove front wiper motor from vehicle as described under WIPER MOTOR.
6.
Remove four nuts attaching wiper motor linkage, then remove wiper motor linkage through left hand cowl cover opening, Fig. 10.
7.
Reverse procedure to install.
