Metro L4-079 1.3L VIN 9 TBI (1995)
Owners of vehicles recently sold from your new vehicle inventory with no owner information indicated on the dealer listing, are to be contacted by the
dealer, and arrangements made to make the required correction according to the instructions contained in this bulletin. This could be done by mailing to
such owners a copy of the owners letter accompanying this bulletin. Campaign follow-up cards should not be used for this purpose, since the owner may
not as yet have received the notification letter.
In summary, whenever a vehicle subject to this campaign enters your vehicle inventory, or is in your dealership for service in the future, please take the
steps necessary to be sure the campaign correction has been made before selling or releasing the vehicle.
PARTS INFORMATION
NOTICE
100% of parts required to complete this campaign will be preshipped to involved dealers of record. This preshipment will occur during the week of
October 31, 1994. Parts received for recently transferred vehicles should be forwarded by the original dealer to the dealer that received the
transferred vehicle.
Any additional parts required to complete this campaign are to be obtained from General Motors Service Parts Operations (GMSPO). To ensure these
parts will be obtained as soon as possible, they should be ordered from GMSPO on a "C.I.O." order with no special instruction code, but on an advise
code (2).
SERVICE PROCEDURE
1.
Raise vehicle and suitably support.
2.
Remove wheel covers (if equipped) from both sides.
3.
Remove all lug nuts and wheel.
4.
Remove dust cover (not to be reused).
5.
Unstake spindle nut with punch.
6.
Remove spindle nut (not to be reused) and washer (not to be reused).
7.
Remove brake drum (not to be reused).
8.
Install new brake drum assembly.
9.
Install new washer and new spindle nut and torque to 120 N-m (86.5 lb.ft.).
10.
Stake spindle nut with punch.
11.
Install new dust cover.
12.
Repeat procedure for rear brake drum on opposite side of vehicle.
13.
Lower vehicle.
14.
Install Campaign Identification Label.
CAMPAIGN IDENTIFICATION LABEL
Each vehicle corrected in accordance with the instructions outlined in this Product Campaign Bulletin will require a "Campaign Identification Label".
Each label provides a space to include the campaign number and the five (5) digit dealer code of the dealer performing the campaign service. This
information may be inserted with a typewriter or a ball point pen.
Each "Campaign Identification Label" is to be located on the radiator core support in an area which will be visible when the vehicle is brought in for
