Metro L4-079 1.3L VIN 9 TBI (1995)
Exhaust Manifold: Service and Repair
1. Disconnect battery ground cable, then raise and support vehicle.
2. Disconnect catalytic converter from manifold, then lower vehicle.
3. Disconnect oxygen sensor electrical connector, then release wiring harness from clamps.
4. Remove heat shield and engine hanger.
5. Disconnect exhaust pipe from exhaust manifold.
6. Remove exhaust manifold attaching bolts and nuts, then remove exhaust manifold from cylinder head.
7. Reverse procedure to install, ensuring to install new gasket. Tighten fasteners to specifications.