Metro L4-079 1.3L VIN 9 TBI (1995)
Ignition Coil: Service and Repair
Ignition Coil And Bracket
IGNITION COIL REPLACEMENT
REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Secondary (coil) wire from ignition coil.
3. Ignition coil electrical connector.
4. Relays from ignition coil mounting bracket.
5. Two bolts and ignition coil mounting bracket (with ignition coil and igniter) from bulkhead.
6. Two screws and ignition coil from mounting bracket.
INSTALL OR CONNECT
1. Ignition coil to ignition coil mounting bracket; secure with two screws.
2. Ignition coil mounting bracket to bulkhead; secure with two bolts. Tighten ignition coil mounting bracket bolts to 15 Nm (11 lb ft).
3. Relays to ignition coil mounting bracket.
4. Ignition coil electrical connector.
5. Secondary (coil) wire to ignition coil.
6. Negative (-) battery cable. Tighten Negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb ft).
