geo Workshop Repair Guides

Geo Workshop Service and Repair Manuals

Sensors and Switches - Powertrain Management > < Igniter <--> [Ignition Control Module]|Locations
Page 1
background image

Igniter: Service and Repair

Left Rear Of Engine Compartment

IGNITER REPLACEMENT PROCEDURE

REMOVE OR DISCONNECT

1. Negative (-) battery cable.
2. Igniter electrical connector.
3. Two screws and igniter from mounting bracket.

INSTALL OR CONNECT

1. Two screws and igniter to mounting bracket.
2. Igniter electrical connector
3. Negative (-) battery cable. Tighten negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb ft).

Sensors and Switches - Powertrain Management > < Igniter <--> [Ignition Control Module]|Locations