Prizm L4-108 1.8L DOHC VIN 8 MFI (1995)
6.
Remove connectors and check for ANY evidence of liquids, dried liquid residue or corrosion (See Figure 1);
A).
On top of sensor
B).
On sensor connector terminals
C).
On connector terminals
D).
On sensor mounting bracket.
7.
If there is NO evidence of liquids, dried liquid residue or corrosion, reconnect the connectors and proceed to Vinyl Sheet Installation procedure in
this bulletin. If there is ANY evidence of spilled liquids, proceed to Sensor Replacement and Connector Cleaning procedure in this bulletin.
Vinyl Sheet Installation