Prizm L4-108 1.8L DOHC VIN 8 MFI (1995)
7. Raise and suitably support vehicle.
8. Right front wheel and tire assembly.
9. Ten bolts, two plastic clips and right front wheelhousing.
10. Loosen the coolant pump pulley mounting bolts.
11. Loosen generator adjusting bolt, pivot bolt and lock bolt and Remove generator/coolant pump drive belt.
12. Lower vehicle.
13. Loosen the idler pulley mounting bolt.
14. Loosen the idler pulley adjusting bolt and Remove the A/C compressor drive belt (if equipped).
15. A/C compressor electrical connector (if equipped).
16. Four bolts and A/C compressor, relocate compressor and suspend (if equipped).
17. Four bolts and A/C compressor mounting bracket (if equipped).
