Prizm L4-108 1.8L DOHC VIN 8 MFI (1995)
Crankshaft Position Sensor: Service and Repair
Crankshaft Position (CKP) Sensor
CRANKSHAFT POSITION SENSOR REPLACEMENT
REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Crankshaft Position (CKP) Sensor electrical connector. Raise and suitably support vehicle.
3. One bolt and CKP sensor from vehicle.
INSTALL OR CONNECT
1. CKP sensor to vehicle; secure with one bolt. Tighten CKP sensor nut to 9.3 Nm (82 lb. in.).
^
Lower vehicle
2. CKP sensor electrical connector.
3. Negative (-) battery cable. Tighten negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb. ft.).
