Prizm L4-108 1.8L DOHC VIN 8 MFI (1995)
Fuel Supply Line: Service and Repair
Fuel Tank Fuel Hose Replacement
Fuel Hose To Pipe Connection
FUEL TANK FUEL HOSE REPLACEMENT
PRELIMINARY STEPS
^
Relieve fuel system pressure. Refer to Fuel System Pressure Relief.
^
Remove negative battery cable from battery.
^
Raise and suitably support vehicle.
REMOVE OR DISCONNECT
1. Two clamps and fuel vapor hose from fuel vapor pipe (see image).
2. Two clamps and fuel return hose from fuel return pipe (see image).
INSTALL OR CONNECT
1. Fuel return hose to fuel return pipe; secure with two clamps.
2. Fuel vapor hose to fuel vapor pipe; secure with two clamps.
^
Lower vehicle.
3. Negative (-) battery cable. Tighten negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb. ft.).
AFTER REPAIR INSPECTION
Turn ignition switch to "ON" and momentarily connect a jumper between Data Link Connector (DLC) terminals "+B" and "FP" to pressurize the
fuel system. Check for any fuel leaks.
