Prizm L4-108 1.8L DOHC VIN 8 MFI (1995)
Throttle Position Sensor: Service and Repair
Throttle Position Sensor
THROTTLE POSITION SENSOR REPLACEMENT
TOOL REQUIRED
J 39200 Digital Multimeter
REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Throttle Position (TP) sensor electrical connector.
3. Two screws and TP sensor from throttle body.
INSTALL
TP sensor to throttle body; secure with two screws (Do not tighten fully).
Feeler Gage Installation
ADJUST