Prizm L4-108 1.8L DOHC VIN 8 MFI (1995)
Coolant Temperature Sensor/Switch (For Computer): Service and Repair
Engine Coolant Temperature (ECT) Sensor
ENGINE COOLANT TEMPERATURE SENSOR REPLACEMENT
PRELIMINARY STEP
Drain engine coolant.
REMOVE OR DISCONNECT
1. Negative (-) battery cable.
2. Engine Coolant Temperature (ECT) sensor electrical connector.
3. ECT sensor from engine coolant inlet housing.
INSTALL OR CONNECT
1. ECT sensor to engine coolant inlet housing.
2. ECT sensor electrical connector.
3. Refill engine coolant to proper level.
4. Negative (-) battery cable. Tighten negative (-) battery cable-to-negative battery terminal retainer to 15 Nm (11 lb. ft.).
