Prizm L4-108 1.8L DOHC VIN 8 MFI (1995)
Fluid - A/T: Service and Repair
Fluid Change
Aisin Warner A131L
Refer to Lubricant Data transmission fluid specifications. See: Specifications/Capacity Specifications
1. Raise and support vehicle, then place a suitable container under transaxle drain plug.
2. Remove drain plug and drain fluid, then reinstall and tighten drain plug to specification.
3. With engine off.
4. Start engine, then move selector lever through all ranges and end in Park.
5. With engine idling, check fluid level, then if necessary, add fluid as necessary to bring fluid to Cool level on dipstick.
Aisin Warner A240E
Refer to Lubricant Data for transmission fluid specifications. See: Specifications/Capacity Specifications
1. Drain transaxle fluid.
2. Install drain plug and new gasket.
3. Add fluid through filler tube. Do not overfill.
4. Start engine, ensure smooth shift operation in all positions.
5. With engine at idle, check fluid COOL level, fill as required.
6. Allow vehicle to reach normal operating temperatures, then recheck level.