Prizm L4-1600cc 1.6L DOHC VIN 5 (1989)
Ignition Control Module: Service and Repair
REMOVAL
1. Disconnect negative battery cable.
2. Disconnect igniter electrical connector.
3. Remove two screws that hold igniter bracket to the strut tower.
4. Remove igniter.
INSTALLATION
1. Install igniter to bracket.
2. Install the igniter bracket to the strut tower and secure with two screws.
2. Install igniter electrical connector.
3. Connect negative battery cable, and torque to 15 Nm (11 ft lbs).
