geo Workshop Repair Guides

Geo Workshop Service and Repair Manuals

Connecting Rod, Engine > < Lifter / Lash Adjuster, Valve|Specifications
Page 1
background image

Connecting Rod Bearing: Service and Repair

Fig. 43  Main & Rod Bearing Identification. GSi Models w/16 Valve Engine

Fig. 44  Main & Rod Bearing Identification. Except GSi Models

    Main and rod service bearings are available in 5 standard sizes, marked 1 through 5. If replacing a bearing, replace with one having the
same number. If the number of the bearing cannot be determined, select a bearing according to the numbers imprinted on the cylinder block
and crankshaft then refer to Fig. 43 & 44
 for proper bearing number.

Connecting Rod, Engine > < Lifter / Lash Adjuster, Valve|Specifications