geo Workshop Repair Guides

Geo Workshop Service and Repair Manuals

Instrument Panel Assembly Replacement|Page 4243 > < Instrument Panel Assembly Replacement|Page 4241
Page 3
background image

22.

Disconnect two radio electrical connectors and antenna from radio.

23.

Remove three glove box door scuff plate retaining screws.

Fig. 202 Removing Side Trim Panel

Fig. 203 Removing Glove Box Assembly

Fig. 204 Removing I/P Assembly

24.

Remove one side trim panel retaining screw, Fig. 202.

25.

Remove cowl side trim, then five glove box and trim assembly retaining screws, Fig. 203.

26.

Pull glove box out of trim assembly, then disconnect speaker electrical connector.

27.

Remove glove box and trim assembly.

28.

Remove glove box retaining pins and glove box door from trim panel.

29.

Remove four heater and A/C control unit retaining screws.

30.

Remove remaining console retaining screws, then the console.

Instrument Panel Assembly Replacement|Page 4243 > < Instrument Panel Assembly Replacement|Page 4241