Prizm L4-1800cc 1.8L DOHC (1993)
8.
Distributor housing mounting bolts and distributor from cylinder head.
9.
O-ring from distributor housing.
INSTALL OR CONNECT
10.
New O-ring from distributor housing.
11.
Distributor to cylinder head; loosely secure the two mounting bolts. Match the marks made on the engine during removal. Be certain that the rotor
position also matches the marks made on the distributor during removal.
12.
Distributor electrical connectors C1 and C2.
13.
Distributor cap and three mounting bolts to distributor.
14.
Secondary plug wires to distributor cap.
15.
Secondary plug wire retainers to distributor cap.
16.
Negative battery cable.
SET
Adjusting Ignition Timing
17.
Ignition timing.