Prizm L4-1800cc 1.8L DOHC (1993)
Brake Fluid Level Switch: Initial Inspection and Diagnostic Overview
Brake Warning System Check
Troubleshooting Hints
PROCEDURE
1. Check the Gauge Fuse with a fuse tester.
2. Check that the Audio Alarm Module is securely mounted in Junction Block 1.
3. Check that grounds G104 and G200 are clean and tight.
4. Check that the Parking Brake is fully released.
5. Make sure that there is an adequate amount of Brake Fluid in the Master Cylinder Reservoir.
6. Check "BRAKE" Indicator bulb.
7. Before component replacement, check for poor connections at related component and in-line harness connector terminal connections.
