geo Workshop Repair Guides

Geo Workshop Service and Repair Manuals

Throttle Opener/Kicker Control <--> [Idle Speed/Throttle Actuator - Mechanical]|Locations|Page 2313 > < Throttle Opener/Kicker Control <--> [Idle Speed/Throttle Actuator - Mechanical]|Locations|Page 2311
Page 1
background image

Throttle Opener/Kicker Control: Adjustments

ADJUST

^

Start and run engine until normal operating temperature is attained.

Install Tachometer

^

Connect a tachometer to the battery and also to data link connector (DLC) terminal IG.

Disconnecting Throttle Opener Vacuum Hose

^

Disconnect throttle opener vacuum hose at throttle opener and plug the hose end.

^

Maintain engine speed at approximately 2,500 rpm.

^

Release the throttle lever and make sure that the throttle opener is set and the engine speed is 1,300 - 1,500 rpm with the radiator fan motor OFF.
Replace the throttle opener if it does not set.

Throttle Opener/Kicker Control <--> [Idle Speed/Throttle Actuator - Mechanical]|Locations|Page 2313 > < Throttle Opener/Kicker Control <--> [Idle Speed/Throttle Actuator - Mechanical]|Locations|Page 2311