Prizm L4-1800cc 1.8L DOHC (1993)
Vehicle Speed Sensor: Service and Repair
Automatic
Remove or Disconnect
1.
Negative (-) battery cable.
Vehicle Speed Sensor
2.
Vehicle speed sensor (VSS) electrical connector from VSS.
3.
One bolt and VSS from transaxle case.
Inspect
1.
For VSS diagnosis procedures.
2.
VSS 0-ring for cuts or damage. Replace as necessary.
Install or Connect
Tool Required: J36850 Transjel Transmission Assembly Lubricant
^
Apply J36850 to the VSS 0-ring.
1.
VSS into transaxle case; secure with one bolt.
Tighten
^
Vehicle speed sensor (VSS) bolt to 6 Nm (53 lb.in.).
2.
VSS electrical connector to VSS.
3.
Negative (-) battery cable.
Tighten
^
Negative (-) battery cable-to-negative (-) battery terminal retainer to 15 Nm (11 lb.ft.).
