geo Workshop Repair Guides

Geo Workshop Service and Repair Manuals

California|Page 2936 > < California|Page 2934
Page 3
background image

8.

Tighten the TPS mounting screws.

9.

Recheck the TPS continuity.

10.

Reconnect TPS electrical connector.

11.

Reconnect throttle opener vacuum hose and apply vacuum to throttle opener (California emissions).

NOTE:  On vehicle with California Emissions perform the throttle opener adjustment below.

1.

Start engine and run until normal operating temperature is attained.

Tachometer Installation

2.

Connect a tachometer between battery negative and DTC connector "IG-".

Throttle Opener

3.

Disconnect throttle opener hose and plug.

4.

Raise engine speed to 2500 rpm and hold.

California|Page 2936 > < California|Page 2934